Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 21 (kliknij aby zobaczyć)
Check the following list to be sure a service call is really necessary. If the water won't drain: � Isthe hose kinkedor knotted? � ts the drain outlet clogged? If the washer does not fill: � Are the hot and cold faucets turned on? � ts the electricat cord plugged in correctly? � Has a fuse blown or is the circuit breaker tripped? If the washer � Have the controlsbeen properlyset? � is the lid closed? � ts the PauseIndicatorlit? If so, touch the START/PAUSE Pad, � Is the electrical cord pLuggedin correctly? � Turn off, let stand for 30 minutes then restarL Motor thermal protector may have engaged. � Are the hot and cold water faucets turned on? � Are the hoses kinked or knotted? � Are the hose filters clogged? if water is leaking: If a power � Are the hose connectionstight at the faucets? � Is the end of the drainhose correctlyinserted in and securedto the drainfacility? � Restartand use SPIN ONLY to drain the washer. Then, start a newcycle. failure occurs during a cycle: � Has a fuse blown or is the circuit breaker tripped? does not spin: � Is the water heater set correctly? If the water temperature is incorrect:
� Is the WATER TEMP. SELECTION set correctly? � Are the hoses connected to the correct faucets (hot to hot, cold to cold)?
If the washer is noisy:
� Is the washer level and firm to the floor? � is the load unbalanced? (Excessive vibration can occur when a load becomes unbalanced.)
