Take the following precautions to prevent fire and avoid personal injury :
� When extending the battery cable, or ground cable, use 5mm2 (AWG10) or larger automotive grade cable to avoid cable deterioration or damage to the covering. � Check that no metal objects (coins, tools, etc.) are left inside the unit to avoid short circuits. � If you smell or see smoke, turn the power off immediately and consult your Kenwood dealer. � Do not touch the unit during use because the surface of the unit becomes hot and may cause burns if touched.
� Do not open the top or bottom cover. � Do not install the unit in places it is exposed to direct sunlight, high heat or humidity, water may splash over it, or dust exists.
NOTE
� If you have difficulty in installing this unit in your vehicle, contact your Kenwood dealer.
Cleaning the unit
� If the surface is dirty, wipe it clean with a silicon cloth or soft dry cloth with the power off.
2CAUTION
Do not use hard cloths or paint thinner, alcohol, or other volatile solvents. These may damage external surfaces or remove indicator characters.
2CAUTION
Take the following precautions to keep the unit in proper working order.
� Be sure the unit is connected to a 12V DC power supply with a negative ground connection.
Accessories
Part name
Battery cable (Yellow) (6 m) Ground cable (Black) (1 m) Self-tapping screws (ø4 � 16 mm) Terminal cover (Power terminal)
External View
Number of Items
1 1 4 1
Part name
Round terminal (Large) Round terminal (Medium) Round terminal (Small) Grommets
