Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
Preparing for surround sound
� Press the FRONT key each time to select Front L or Front R channel. � Press the CENTER or SW key to select center or subwoofer channel. � Press the REAR key to select surround channel. And use the REAR key for the following displays. 1 LS : Surround L channel. 2 BS : Back surround channel. 3 RS : Surround R channel. 4 Press the SET UP key again. � The test tone is turned off and return to the main setup displays.
6 Input the distance to the speakers.
1 Measure the distance from the listening position to each of the speakers. Jot down the distance to each of the speakers. Distance to Front left speaker (L) : ____ meters Distance to Center speaker (C) : ____ meters Distance to Front right speaker (R) : ____ meters Distance to Surround right (RS) : ____ meters Distance to Back Surround (BS) : ____ meters Distance to Surround left (LS) : ____ meters Distance to Subwoofer (SW) : ____ meters 2 Press theTRIM%/� keys to select the �DISTANCE� on setup displays and press the SETUP key again. 3 Use the SET UP key to select the speakers and the TRIM%/� keys to adjust the distance to the front speakers. The speaker indicator to be adjusted blinks.
DOLBY DEX NEO:6 DOLBY PLII DTS -ES AAC DISCRETE MATRIX 6.1 ACTIVE EQ. DSP TS MUTE DIGITAL ST. AUTO
LCR LFE SW
LS S BS RS
� The allowable setting range is 0.3 to 9.0 m, adjustable in 0.3 m increments. 4 Repeat steps 3 to input the distance for each of the speakers. 5 Press the SET UP key again to return to main setup displays. � The speakers you have selected should appear on the display. Confirm that all the speakers have been correctly selected.
