SONY KD28DX40U
Instrukcja Serwisowa

Basic Operation

Advanced Operation
VIDEO

The Digital INFO display
This menu gives you information on the programmes currently being shown aswell as the those programmes which are on next. When first selected, the �Digital INFO display� gives a brief description of the current programme being transmitted, its channel number and the start and end time. The title of the next programme and its start and end time is also shown. 1. The �Digital INFO display� is only available when watching Digital channels. If the TV is not already in Digital mode, press the DIGITAL/ button on the remote control. Press the button on the remote control to display the �Digital INFO display� screen.
VIDEO

/

TV

/

Detail Set-up
The �Detail Set-up� menu allows you to further customise your TV with the following features:

DIGITAL

Manual Tuning
This feature allows you to select a channel number from the displayed list and change the digital services of that channel. 1. Press the button on the remote control to display the �Digital INFO display�. Press the BLUE button to display the �Main Menu�. 2. Press the V or v button to highlight �Detail Set-up� then press the OK button to display the �Detail Set-up� menu. 3. Press the V or v button to highlight �Manual Tuning� then press the OK button to display the �Manual Tuning� menu.

/

TV

/

DIGITAL

1 4 7

2 5 8 0

3 6 9
OK

2. Press the b button to obtain a brief description of the next programme in the schedule. If the programme box is blank, there is no information currently available. To return to the starting point, press the B button repeatedly until the description for the current programme reappears. 3. Press the
Note:

button on the remote control at any time to exit the �Digital INFO display�.

4. Press the V or v button to highlight the chosen channel number for your new channel. If you do not wish to select any of the programme numbers listed, press the RED or GREEN button to display the previous or next 5 programme numbers on the list. 5. With your channel number highlighted, press the OK button to display the �Manual Programme Search� screen. 6. Press the V or v button if you wish to change the channel number, then press the b button to make the select search box active. 7. Press the V or v button to begin the search process. The words �Searching Down� or �Searching Up� appear in the select search box to indicate that the TV is searching. If no Digital services are found on the channel you have chosen, the channel number changes up or down automatically and the search continues. When all services allocated to the selected channel have been found, the service selection screen is displayed. 8. Press the V or v button to find and highlight the service you wish to allocate to the channel number selected in Step 4, then press the OK button to display the channel selection screen. 9. Repeat Steps 4 to 8 if you wish to manually add more channels to your TV. 10. Press the BLUE button on the remote control three times to remove the �Digital INFO display� from the TV screen.

OK

To change channels while the �Digital INFO display� is on screen, press the relevant numbered buttons on the remote control.

Using other INFO menu features
Subtitles
This feature will place Digital subtitles on the screen (similar to selecting p.888 in analogue Teletext mode). With the �Digital INFO display� on the TV screen, press the RED button to access the �Subtitles� pop-up menu. Press the V or v button to highlight the language required then press OK to select. To remove subtitles from the TV screen, access the �Subtitles� pop-up menu and select �Off�.

9 16 Basic Operation

Audio
This feature allows you to listen to the broadcast in different languages*. With the �Digital INFO display� on the TV screen, press the GREEN button to access the �Audio� pop-up menu. Press the V or v button to highlight the language required then press OK to select.

PIN Code
This feature allows you to set a 4-digit PIN code. 1. Press the button on the remote control to display the �Digital INFO display�. Press the BLUE button to display the �Main Menu�. 2. Press the V or v button to highlight �Detail Set-up� then press the OK button to display the �Detail Set-up� menu. 3. Press the V or v button to highlight �PIN Code� then press the OK button to display the �PIN Code� menu.

REC
This feature allows you to automatically set your VCR to record the selected programme**, or have the TV switch to the correct channel automatically when the selected programme starts. With the �Digital INFO display� on the TV screen, press the YELLOW button to access the �REC� pop-up menu. If your VCR does not have Smartlink a message is displayed reminding you to manually set your VCR. Press the RED button to continue or press the BLUE button to return to the INFO display.
Notes: Do not switch off theTV once a programme has been set to record. If you do not wish to view the programme being recorded, press the TV / button on the remote control to switch the TV into standby mode. When a programme has been set to record and the TV is in standby mode the standby indicator on the front of the TV will flash green periodically to inform you that a programme has been set to record. Do not change channels or switch the TV to analogue mode once a programme has started recording or the recording will be cancelled.

VIDEO

/

TV

/

DIGITAL

1 4 7

2 5 8 0

3 6 9

Set-up
With the �Digital INFO display� on the TV screen, press the BLUE button to access the �Main Menu�. The �Main Menu� is explained on the following pages.
Notes: *Only when the programme is broadcast in multiple languages. **Only for Smartlink VCRs

OK

4. Enter your PIN code using the numbered buttons on the remote control. If you enter a wrong number, press the RED button to clear and start again. 5. Once you have entered a 4-digit code a cursor will appear in the second PIN Code box. Enter your new PIN code once again as confirmation. Press the OK button to confirm. 6. When both PIN codes match, a message appears to inform you that your new PIN code has been accepted. This is the PIN code you must use in future. 7. Press the BLUE button on the remote control to remove the �Digital INFO display� from the TV screen.
Note: If you have forgotten your PIN code, please use 9999. This PIN code will always be accepted.

Advanced Operation

19