SONY KD34XBR2
Instrukcja Serwisowa

Using the DTV Features

5 Move the joystick V and v to set the day(s), time (hour, minute,
AM/PM), duration, and channel number. Press or b to confirm each setting and move to the next setting. Press B to go back to the previous setting.

6 After you�ve set the channel number, press

to save the Timer settings. The settings are displayed in the Timer screen and the Timer is set to On.

The DTV is now set to turn on, tune to the channel you�ve set, and then turn off at the times you set for that Timer. The Timer indicator on the front panel indicates the Timer is set.
To turn a Timer setting on or off � Select On or Off in step 3 (page 45). To change a Timer setting � Set the timer (Timer 1 or Timer 2) again. The old timer setting is

overwritten.
To set a second Timer setting � Set the other unset timer (Timer 1 or Timer 2).

Setting the Clock
z You can also access the

If you didn�t set the clock during the DTV�s initial setup (see page 31), you need to set it before you can set either of the Timers.

1 Press TIMER.
The Timer Setup screen appears (as shown on pag e45).

Timer through the Setup menu. For details, see page 60.

2 Move the joystick V or v to highlight Set the Clock, then press . 3 Move the joystick V and v to set the current day and time (hour,
minute, and AM/PM). Press or move the joystick b to confirm each setting and move to the next setting. Move the joystick B to go back to the previous setting.

4 When you finish setting the day and time, press
clock settings.

to save the

46