|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Documentation made available quickly and It is good quality. Thanks.
3.2.10 Removing the spindle motor (See Fig.20) � Remove the mechanism control board. Remove the two screws L attaching the spindle motor on the bottom of the body. Caution: Perform adjustment when reattaching the spindle motor.
Spindle motor
L
Fig.20 3.2.11 Removing the feed motor assembly (See Fig.21 and 22) � Remove the mechanism control board. (1) Remove the feed TRI. spring on the bottom of the body. (See Fig.21.) (2) Remove the two screws M attaching the feed motor assembly. (See Fig.21.) (3) Remove the slit washer from the motor H. assembly and pull out the worm wheel. (See Fig.22.) Remove the two screws N attaching the feed motor. (See Fig.22.)
M
Feed TRI. spring Feed motor assembly
Fig.21
Slit washer
Worm wheel
Feed motor
N
Motor H. assembly
Fig.22 (No.MA153)1-19
 $4.99 KD-ADV6160 JVC
Schematy Zestaw schematów dla tego urządzenia. Plik PDF zawierający schematy będzie dostarczony na Twó…
|
