Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
Tuning
You can choose from three tuning modes: auto seek, preset station seek, and manual. The �AUTO 1� indicator lights up when auto seek tuning is selected, and the �AUTO 2� indicator lights when preset station seek tuning is selected. Selecting Tuning Mode: Press the AUTO button. Each time you press the AUTO button, the mode switches as follows.
M
received.
Station Preset Memory
Store the frequency of a station. You can then recall that station with a single touch of a button.
1 Select the band/ station that you want to have stored. 2 Press the button (#1-6) that you want to use for the station, for
at least two seconds. The button number blinks once in the display to indicate that the data has been stored. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.
NOTE
Auto 1 (Auto Seek Tuning)
M
Auto 2 (Preset Station Seek Tuning) Manual (Manual Tuning) Tuning: 1 Press the SRC (source) button repeatedly to select the tuner mode. "TUNER" is displayed when the tuner mode has been selected.
M
You can store six stations in each of the FM1, FM2, FM3, and AM bands.
2 Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches between the FM1, FM2 and FM3 (which are used for groups of preset stations). Press the AM button to select the AM band. 3 � Auto Seek Tuning Press the ¢ button to seek higher frequencies. Press the 4 button to seek lower frequencies. � Preset station seek tuning Press the ¢ button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the next lowest number). � Manual Tuning Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.
NOTE
The ST indicator lights up when stereo broadcasts are being
