SONY KDE42XBR950
Instrukcja Obsługi

Using the i.LINK Control Panel
After you select an i.LINK device using the Device List, the TV displays the i.LINK Control Panel, which allows you to use the TV's remote to control the selected i.LINK device.

i.LINK

1 If the i.LINK Control Panel is not already displayed, press i.LINK on the
remote control.
If i.LINK is pressed while the TV is displaying an analog or digital channel (not the i.LINK device), then the Device List will appear. Select the desired device from the list and press to display the Control Panel.

2 Press V v B b on the remote control to navigate through the options
available in the i.LINK Control Panel.

3 Press to select a desired option. 4 Press EXIT to exit the Control Panel and view the i.LINK device fullscreen.
To exit i.LINK mode, select DTV from the Device List or press CH+/-.

The DTV window appears only if the i.LINK menus were entered while watching a digital TV channel

The i.LINK Control Panel displays the signal from the TV to the left (if available), and the signal from the currently selected device to the right.

91