Remote controller � RM-RK60
ENGLISH
This unit can be remotely controlled as instructed here (with an optionally purchased remote controller). We recommend that you use remote controller RM-RK60 with your unit.
Main elements and features
Installing the lithium coin battery (CR2025)
1
Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between.
Warning:
� Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. � Store the battery in a place where children cannot reach to avoid risk of accident. � To prevent the battery from over-heating, cracking, or starting a fire: � Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire. � Do not leave the battery with other metallic materials. � Do not poke the battery with tweezers or similar tools. � Wrap the battery with tape and insulate when throwing away or saving it.
(standby/on attenuator) button � Turns the power on if pressed briefly or attenuates the sound when the power is turned on. � Turns the power off if pressed and held. 2 SRC (source) button � Selects the source. 3 R (reverse) / F (forward) buttons � Searches for stations if pressed briefly. � Fast-forwards or reverses the track if pressed and held. � Changes the tracks of the disc if pressed briefly. 4 SOUND button � Selects the sound mode (C-EQ: custom equalizer). 5 U (up) / D (down) buttons � Changes the FM/AM bands with U only. � Changes the preset stations with D only. � Changes the folder of the MP3/WMA discs. 6 VOLUME � /+ buttons � Adjusts the volume level.