Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
Tekstowy podgląd strony 26 (kliknij aby zobaczyć)
KDL-26S2000/32S2000/40S2000
2-2-2. VIEWING THE DIGITAL MODULE BOX (Q-BOX) SERVICE ITEMS
Use the following instructions to display the Digital menu items you want to adjust. 1. Turn the TV on and view a Digital channel. 2. Put the TV in standby mode. (Power off). 3. Press the following buttons on the Remote Commander within a second: DISPLAY POWER On. Channel 5 Volume + The Digital service menu displays.
Video 1 MAIN VER. H PACK VER. S PACK VER. CHECK SUM NVM VER. ATI VER. ATI UD NVM VER. ATI SD NVM VER. ETI 1009 1008 1008 E20E 1006 01.06 02 02 46h 39m
2-2-3. ACCESSING THE ANALOG SERVICE ADJUSTMENT MENUS
1. Turn the TV on and view an Analog channel. 2. Put the TV in standby mode. (Power off). 3. Press the following buttons on the Remote Commander within a second: DISPLAY Channel 5 Volume + POWER On. The Analog service menu displays.
Video 1 MAIN VER. 1008 1005 F99F 1006 1008
H PACK VER. S PACK VER. CHECK SUM NVM VER. ATI VER. ATI UD NVM VER. ATI SD NVM VER. ETI
02 2h 16m
4. Use the button to view the next category listing the white balance adjustment items. 4. To display the Digital Module (Q Box) service adjustment menus, press JUMP . The QM category displays.
Video 1 R_DRIVE B_DRIVE R_BKG G_BKG B_BKG 256 256 512 512 512
Category
Data Value Item # 0 0 SERVICE DTV
Sample DMB (Q Box) Service Menu
COLOR SAVE
QM INFO
5. Use the or button to select the item you want to adjust. a. b. To increase the data value of the category, press the button. To decrease the data value of the category, press the button.
Item
5. To change the category, press 2 or 5 on the Remote Commander. Note: Pressing 2 or 5 only changes the categories within the service menu displayed. To return to the Digital Service Menu, press the JUMP button. 1 4 6. To change the adjustment item, press or on the Remote Commander. 7. To change the data value, press 3 or 6 on the Remote Commander. Note: To go back to the last saved data value, press 0 then ENTER on the Remote Commander to read the memory. 8. To write into memory, press MUTING then ENT on the Remote Commander. 9. To exit service mode, turn the power off.
6. To save the data value changes, press the button to select Color Save and then press the button. a. b. To save the data value changes, select Save by pressing the button and then press the button. To cancel the data value changes, select Cancel by pressing the button and then pressing the button.
