Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 25 (kliknij aby zobaczyć)
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your preference.
2
Adjust the level.
To increase the level.
1
Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:
To decrease the level.
(Fader) (Canceled)
Fad
(Balance)
Bal
(Super Bass)
S.Bass
Vol Adj
Sub Out
While adjusting fader and balance �Fad, Bal: You can make these two adjustments at the same time, by referring to the indication on the display.
(Volume Adjustment) (Subwoofer Output)
Indication Fad*1
To do: Adjust the front and rear speaker balance.
Range R06 (Rear only) | F06 (Front only)
Bal
Adjust the left L06 (Left only) and right speaker | balance. R06 (Right only) Adjust the bass. 00 (min.)
|
S. Bass*2
� Press 5 or � to adjust the fader. � Press ¢ or 4 to adjust the balance. While adjusting subwoofer output �Sub Out: You can also set an appropriate cutoff frequency level according to the subwoofer connected:
Sub Out*
3
Adjust the subwoofer output level and cutoff frequency level. Adjust and store the input level of each source.
08 (max.) 00 (min.)
|
Vol Adj*4
12 (max.) Low/Mid/High �12 (min.)
|
+12(max.)
*1 If you are using a two-speaker system, set the fader level to �00.� * The richness and fullness of the bass sound is
2
� Press ¢ or 4 �Mid,� or �High.� Low:
to select �Low,�
clearly maintained regardless of how low you set the volume. *3 This takes effect only when a subwoofer is connected. * By adjusting the input level to match it to the FM
4
sound level, you will not need to adjust the volume level each time you change the source. This adjustment is memorized for each source except FM.
Frequencies higher than 50 Hz are cut off to the subwoofer. Mid: Frequencies higher than 80 Hz are cut off to the subwoofer. High: Frequencies higher than 115 Hz are cut off to the subwoofer.
