JVC KDS620
Instrukcja Serwisowa

KD-S570/KD-S620

Disassembly method
Removing the front panel unit (See Fig.1)
1. Press the release switch and remove the front panel unit in the direction of the arrow.

Fig.1

Removing the front chassis (See Fig.2)
1. Insert a screwdriver to the joints a on the side of the front chassis and two joints b on the right side, then detach the front chassis toward the front side.

a

b

a
Removing the heat sink (See Fig.3)
1. Remove the three screws A attaching the heat sink on the left side of the body, and remove the heat sink.

Front chassis

b

Fig.2

A

A

A
Fig. 3

Heat sink

c
Removing the bottom cover (See Fig.4)
1. Turn the body upside down. 2. Insert a screwdriver to the two joints c and two joints d on both sides of the body and the joint e on the back of the body, then detach the bottom cover from the body.

Regulator board

d e
Fig. 4

1-4