Storing your own sound adjustments
You can adjust the sound modes (BEAT, POP, SOFT) to your preference and store your own adjustments in memory. � There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
4 5
Repeat steps 2 and 3 to adjust the other items. To turn on or off the loudness function.
� See page 13 for details.
LOUD
1
Call up the sound mode you want to adjust.
SCM
6
Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
SCM
� See page 14 for details.
Ex.: When you select �SOFT�
2
To adjust the bass or treble sound level.
Select �BAS� or �TRE.�
Your adjustment made for the selected sound mode is stored in memory.
SEL
7
Repeat the same procedure to store other sound modes.
To reset to the factory settings
Ex.: When you select �TRE�
Repeat the same procedure and reassign the preset values listed in the table on page 14.
3
Adjust the bass or treble level.
� See page 13 for details.
