KENWOOD KDV-S240P
Instrukcja Obsługi

CD/MP3 features
Program Play
Plays the selected songs only in order.

Direct Skip Play
Directly calls the song you want to play.

1 Stop playback
Press the [7] button.

1 Enter the Track, File, or Folder number you
want to play Press the [0] � [9] button.

2 Enter the Program mode
Press the [PROG] button. Switches "PLAY MODE" displayed at the bottom of the screen to "PROGRAM PO" during MP3 playback.

2 Play
Press the [ENTER] button.
� If you do not perform the operation of Step 2 for about 5 seconds, the song entered in Step 1 is automatically searched for.

3 Select the song you want to play
Press the [2]/[5]/[3]/[�] (during MP3 playback only) or [0] � [9] button. Specifies the file containing the song you want to play.

4 Finalize the song you want to play
Press the [ENTER] button. The song selected in Step 3 is registered as Program number 1.

Play Time Search [CD]
Enter the play time to start from where you want.

1 Enter the Play Time Search mode
Press the [SEARCH] button.

5 Repeat Steps 3 and 4 to register all the songs
you want to program play. For MP3, if you have finished programming, press the [7] button to exit the Program mode.

2 Enter the play time where you want to start
Press the [0] � [9] button. For example 5:07 � [0], [5], [0], [7] Starts playing from the time you entered.

6 Start Program Play
Press the [38] button. Plays the registered songs in order.

Canceling Program Play for CD Press the [7], [PROG] and [ENTER] buttons in order. Canceling Program Play for MP3 Press the [7] and [PROG] buttons in order.

16 |

English