|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Section
06
Audio Adjustments
Setting the sound focus equalizer
Clarifying the sound image of vocals and instruments allows the simple staging of a natural, pleasant sound environment. Even greater listening enjoyment will be obtained if seating positions are chosen carefully. � FRT1 boosts the treble on the front output and the bass on the rear output. FRT2 boosts the treble and the bass on the front output and the bass on the rear output. (The bass boost is the same for both front and rear.) For both FRT1 and FRT2 the HI setting provides a more pronounced effect than the LOW setting. 1 Press SFEQ to select the desired SFEQ mode. Press SFEQ repeatedly to switch between the following setting: FRT1-HI (front 1-high)�FRT1-LOW (front 1low)�FRT2-HI (front 2-high)�FRT2-LOW (front 2-low)�CUSTOM (custom)�SFEQ OFF (off) Selected mode (e.g., F1) appears in the display. 2 Press 2 or 3 to select the desired position. Press 2 or 3 until the desired position appears in the display. L (left)�C (center)�R (right) Note � If you adjust the bass or treble, CUSTOM memorizes an SFEQ mode in which the bass and treble are adjusted for personal preference.
Using balance adjustment
You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FADER. Press AUDIO until FADER appears in the display. � If the balance setting has been previously adjusted, BAL will be displayed. 2 Press 5 or � to adjust front/rear speaker balance. Each press of 5 or � moves the front/rear speaker balance towards the front or the rear. � FADER :F15 � FADER :R15 is displayed as the front/rear speaker balance moves from front to rear. � FADER : 0 is the proper setting when only two speakers are used. � When the rear output setting is subwoofer, you cannot adjust front/rear speaker balance. Refer to Switching the rear output setting on page 31. 3 Press 2 or 3 to adjust left/right speaker balance. When you press 2 or 3, BAL : 0 is displayed. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right. � BAL :L9 � BAL :R9 is displayed as the left/right speaker balance moves from left to right.
24
En
|
|
|
> |
|
