KENWOOD KGC9044
Instrukcja Obsługi

Equalizer Adjustment
You can adjust the sound level to suit your preference among 11 frequencies: 60 Hz, 120 Hz, 250 Hz, 380 Hz, 500 Hz, 750 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, and 16 kHz.

Equalizer Curve Memory
You can store four types of adjusted equalizer curves in memory, and can call up an original equalizer curve at the touch of a button.

Selecting Band for Adjustment: Each time you press the 2 button, the band shifts to the left (lower frequencies), while each time you press the 3 button, the band shifts to the right (higher frequencies).

1 To adjust the sound quality to your preference. 2 Hold down any one of buttons 1 to 3 for more than 2 seconds.
The adjusted equalizer curve will be stored in memory.
NOTE

Up to 3 equalizer curves can be stored in memory. Recalling Equalizer Curve from Memory: 1 Press the EQ button, select "USER MODE".

Increasing Level: Press the u button while the band indicator is blinking. The level indicator goes up. The level can be adjusted up to +12 (by two steps). Decreasing Level: Press the d button while the band indicator is blinking. The level indicator goes down. The level can be adjusted down to -12 (by two steps).
NOTE

2 Press any one of buttons 1 to 3.

The equalizer curve stored by the respective button number (1 to 3) will be recalled. The number (1 to 3) of the pressed button is displayed.

� When adjusting the equalizer level, do not adjust solely a single band. Adjust each band to form a curve. � Equalizer adjustment mode will be cancelled automatically if no buttons are pressed for five seconds.

�5�