Assembling the Ice Cream Maker Attachment for Tilt-Head Mixer*
To Attach Drive Assembly:
g p
: U n p
1. Be sure speed-control is still OFF and the mixer is unplugged. 2. Motor Head should still be tilted, and the Freeze Bowl and Dasher should be in place. 3. Determine your mixer model by checking for a spring on the Beater Shaft, then position the Drive Assembly as illustrated for proper placement.
5. Lower the Motor Head to engage the Drive Assembly with the Dasher.
6 8 10 Off/0 Stir 2 4
e inserting CAUTION: Unplug befor
or removing parts.
No Step Spring
Step No Spring
6. Make sure the Motor Head is down completely.
4. Slip the Drive Assembly onto the Motor Head and press upward until it is securely in place.
MOTOR HEAD
s
ov in
Off S tir
246 8
10
BEATER SHAFT
C AU TIO N
lu
gb e fo
rin es e rtin g
or
r em
a
rt
7. Place locking lever in the LOCK position. 8. Before mixing, test the lock by attempting to raise the Motor Head. 9. Plug the mixer into a grounded 3-prong outlet. * For Bowl-Lift Mixer, see page 8 and 9.
