Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 21 (kliknij aby zobaczyć)
Timer
Setting the timer to turn off a burner automatically
To use this feature, a power setting must be selected for the desired burner. All burners can be programmed at the same time. ^ Turn the desired burner on, e.g. rear right, and select a power level. ^ Touch the m sensor until the indicator of the desired burner lights, e.g. rear right. If multiple burners are turned on, the indicators for the activated burners light clockwise from front left to front right.
^ Touch the - or + sensor until the desired time is displayed, e.g. 15 minutes. The set time counts down in minutes. The remaining time is displayed and can be changed at any time by pressing - or +. When the set time has elapsed the burner will automatically turn off. The burner display shows 0, the timer display shows 00 and a tone is heard. After a few seconds the tone stops and the 00 goes out. To end the tone touch the m sensor.
