|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Edit mode (� p.8), and make �MIDI message transmission/reception settings� (� p.8) so that these messages will be received. You can not use the Tap Tempo or Auto BPM functions while the KP2 is receiving Timing Clock from an external MIDI device
10. Sampling and playing back a phrase
A phrase from the audio input can be recorded into one of the Sample 1, 2 keys. Then when you have selected a program from the �SAMPLE/PLAY� group (programs 90�99), you can play back the sample while using the touch pad to control the playback speed or reverse-playback. If you have selected a program from other than the �SAMPLE/PLAY� group, pressing the Sample 1, 2 keys will play back the phrase that was recorded in that key. You can record for approximately six seconds in each of the two keys. The recorded phrases will be lost when the power is turned off. It is not possible to save the recorded phrases.
9. Storing settings in the Program Memory key
The current state of the KAOSS PAD can be stored in one of the Program Memory 1�8 keys, so that it can be instantly recalled whenever you want.
Stored contents
� Effect program � On/off state of the Hold key and the held position (coordinates) � FX/Depth knob setting � For the �BPM FX/PTN� group, the specified BPM value � For the �SAMPLE/PLAY� group, the Sample 1, 2 key used Effect programs 60 and 90�99 do not store the state of the Hold key.
Recording
(1) Press the Rec/Stop key, and the Rec/ Stop key LED will blink to indicate that you are in record-ready mode. (2) Press the Sample 1, 2 key into which you want to record. At this time, you will not hear the playback sound. (3) When you press the Rec/Stop key, the Rec/Stop key LED will light, and recording will begin. Recording will stop when you press the Rec/Stop key once again. Recording will stop automatically when you reach the maximum recording time. For programs of other than the �SAMPLE/ PLAY� group, you can operate the touch pad while you record, and the sound processed by the effect will be recorded.
To store settings
(1) Press the Program Memory 1�8 key that you want to assign. (2) Use the Program/BPM knob to select the effect program that you want to assign. If you want to store the setting of the Hold key, select the program and then turn on the Hold key and touch the touch pad to specify the position. If you want to store other settings, make them at this time. (3) Press and hold down the Program Memory 1�8 key you selected in step (1) for approximately two seconds, and the settings will be stored. When the settings have been stored, the Program/BPM display will stop blinking.
Auto recording (AUTO REC)
You can cause recording to begin automatically when audio is input. This is convenient when recording voice from a mic. (1) In step (2) of the Recording procedure, hold down the Sample 1, 2 key to which you want to record, and press the Rec/Stop key. The Rec/Stop key and Sample 1, 2 key LEDs will blink simultaneously, indicating that you are in record-ready mode. (2) Recording will begin automatically
To recall settings
(1) Press a Program Memory 1�8 key, and the settings stored in that key will be recalled.
6
|
|
|
> |
|
