|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
KP-43T70/46C70/48S70/ 48S72/53N74/53S70/61S70
RM-Y906
[RED REGISTRATION ADJUSTMENT]
<RED CENTER> 1. Change to VPNT mode and set VPNT 28 RON to �001�, 29 GON to �001� and 30 BON to �000� to show the green and red colors. 2. Change the VPNT mode to the PJE mode. 3. Press 3 key on the remote commander to shift the GRN mode to the RED mode. 4. Select RED CENT with the 1 and 4 keys on the remote commander. 5. Adjust the red crosshatch lines go straight vertically and horizontally and overlaps the green lines with the joystick on the remote commander. <RED SKEW> 1. Select RED SKEW with the 1 and 4 keys on the remote commander. 2. Adjust the red crosshatch lines go straight vertically and horizontally and overlaps the green lines with the joystick on the remote commander. <RED LINEARITY> 1. Select RED SIZE (vertically and horizontally) or RED LIN (vertically) with the 1 and 4 keys on the remote commander and adjust while tracking each other alternately. 2. Adjust the red crosshatch lines go straight vertically and horizontally and overlaps the green lines with the joystick on the remote commander. <RED KEY> 1. Select RED KEY with the 1 and 4 keys on the remote commander. 2. Adjust the red crosshatch lines go straight horizontally and overlaps the green lines with the joystick on the remote commander. <RED PINCUSHION> 1. Select RED PIN with the 1 and 4 keys on the remote commander. 2. Adjust the red crosshatch lines go straight horizontally and overlaps the green lines with the joystick on the remote commander. <FINE ADJUSTMENT> 1. Press 9 key on the remote commander to shift to the fine adjustment mode. The red marker (in the RED mode) appears on the center of the screen.
2. Use the 1 and 4 keys or the joystick on the remote commander, move the marker everywhere you want to adjust and adjust with the joystick on the remote commander.
[BLUE REGISTRATION ADJUSTMENT]
1. Change to VPNT mode and set VPNT 28 RON to �001�, 29 GON to �001� and 30 BON to �001� to show full color. 2. Change the VPNT mode to the PJE mode. 3. Press 3 key on the remote commander to shift the RED mode to the BLU mode. 4. Adjust BLU CENT, BLU SKEW, BLU SIZE, BLU LIN, BLU KEY and BLU PIN in the same procedure of the red registration adjustment.
[FINAL CHECK]
1. Store the new adjustment (offset) value on the remote control by pressing [MUTING] and [ENTER]. 2. Press the FLASH FOCUS button on the front panel. (The Offset value is now automatically stored.) 3. Check that no error message appears. If an error message appears, recheck.
� 45 �
|
|
|
> |
|
