SONY KP57WS510
Instrukcja Serwisowa

KP-51WS510/57WS510/65WS510
7. Select �GRN SKEW�, and correct the tilt of horizontal lines and vertical lines. GRN SKEW (Horizontally/Vertically)
Push the joystick to4 Push the joystick to3

10. Select �GRN MSIZ�, and correct the space intervals for the horizontal section so the screen is equal. GRN MSIZ (Horizontally)

Push the joystick to4

Push the joystick to3

11. Select �GRN MLIN�, and correct the sizes of the horizontal line so the center of the screen is symmetrical left and right.
Push the joystick to5 Push the joystick to6

GRN MLIN (Horizontally)

8. Select �GRN SIZE�, and adjust so that each distance from center to left end and to right end is equal. Adjust so that each distance from center to top and to bottom is equal. GRN SIZE (Horizontally/Vertically)
Push the joystick to4 Push the joystick to3

Push the joystick to4

Push the joystick to3

Note: The SIZE and LIN, MSIZ and MLIN adjustments affect each other. If necessary, adjust these mutually. 12. Select �GRN PIN�, and adjust so that right and left vertical lines on the screen become straight. Adjust so that upper and lower horizontal lines on the screen become straight. GRN PIN (Horizontally/Vertically)
Push the joystick to4 Push the joystick to3

Push the joystick to5

Push the joystick to6

9. Select �GRN LIN�, and adjust so that each space at the right end and at the left end of screen is equal. Adjust so that each space at the top and at the bottom of screen is equal. GRN LIN (Horizontally/Vertically)
Push the joystick to4 Push the joystick to3 Push the joystick to5 Push the joystick to6

13. Select �GRN KEY�, and adjust so that upper and lower horizontal lines on the screen become parallel. GRN KEY (Vertically)

Push the joystick to5

Push the joystick to6

Push the joystick to5

Push the joystick to6

Note: The VPIN and KEY adjustments affect each other. If necessary, adjust these mutually. 14. Press the �9� button on the remote commander to enter fine adjustment mode.

� 34 �