Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
To Enter Clock-Setting Mode If the digits on the brew timer display are not flashing, enter the clock-setting mode by turning the Program-Clock Switch clockwise to the �Clock� position, then releasing. The hour digits will begin to flash.
Timer Adjustment Buttons
2. Once the hour is set, turn the Program-Clock Switch clockwise to the �Clock� position, then release. The minute digits will begin to flash. 3. Press the ��� or �+� Timer Adjustment Buttons to adjust the minutes. If a Timer Adjustment Button is pressed and held, the minute digits will scroll. 4. Once the minutes are set, turn the Program-Clock Switch clockwise to the �Clock� position, then release. The minute digits will stop flashing and the brew timer display will exit the clock-setting mode.
To Set The Clock 1. Press the ��� Timer Adjustment Button to decrease the hour or the �+� Timer Adjustment Button to increase the hour. If a Timer Adjustment Button is pressed and held, the hour digits will scroll. The AM and PM icons will change when the hour digits roll past �12�. Make certain the hour set is correct with regard to AM or PM.
