KORG KPE-1
Skrócona Instrukcja Obsługi

KPE-1 EasyStart

Sampling and Playing Back an Audio Phrase or Motion Video
1. Press the REC/STOP key so that it is blinking to put the KPE-1 into record ready mode. 2. Press the SAMPLE 1 or SAMPLE 2 key to select the destination for the sample for audio sampling only; to sample motion video you must select a program from the SAMPLE PLAY group (94-99) in VIDEO mode. 3. Press the REC/STOP key to start sampling, press the REC/STOP key to stop. If the REC/STOP key is not pressed before the 6-second time limit, sampling will stop automatically. 4. To play back an audio sample, either press the SAMPLE 1 or SAMPLE 2 key or select a program in the SAMPLE PLAY group (90-99) and touch the Pad. To play back a video sample, select a program from the SAMPLE PLAY group (94-99) and touch the Pad or select any other program, press and hold the REC/STOP key and touch the Pad. To lock motion video sample playback, press and hold the REC/STOP key and then press the HOLD key. To cancel, press the HOLD key again.

Using Pad Motion and Mute/Freeze
1. To record a Pad Motion, push the PAD MOTION Switch up and then touch the Pad. It will record approximately six seconds of Pad movement including tapping the Pad. To stop recording, release the switch. 2. To play back a Pad Motion, push the PAD MOTION switch up and it will loop play the previously recorded Pad Motion. If you touch the Pad during playback, Pad Motion recording will start again. Pad Motion is not stored in memory and once you change the program or turn the KPE-1 off, Pad Motion will be erased. 3. To Mute audio input or Freeze the video input, pull the MUTE/FREEZE switch down.

Storing and Playing a Video Still Image
1. Pull the MUTE/FREEZE switch down and then press the SAMPLE 1 or SAMPLE 2 key to store the current image to that key. 2. To playback the still image and apply an effect to it, press the SAMPLE 1 or SAMPLE 2 key and then touch the Pad. To stop playback press the SAMPLE 1 or SAMPLE 2 key again.

Syncing BPM Effects using Tap Tempo/Auto BPM
1. Select a program in the BPM FX (Audio 50-61, Video 54-60) or BPM PTN (Audio 62-69) group. 2. Tap the TAP/BPM key in time with the music and the effect will sync to the incoming audio. 3. To use the AUTO BPM detect, press and hold the TAP/BPM key for several seconds until you see three dots in the screen.

3