KENWOOD KRC-378R
Instrukcja Obsługi

External disc control features
English
Presetting Disc Names
Store the names of discs to be displayed when played. The disc name is stored and the disc name preset mode is cancelled. If you make no entry in a 10-second period, the name will be stored with the characters entered so far.
NOTE

1 Play the disc whose name you want to preset.
NOTE

� This function is not available for disc changers that do not feature the Disc Name Preset function. � This procedure is not to be used to store the disc and track titles for MDs that you record. 2 Hold down the NAME.S button for two seconds or more. "NAME SET" is displayed and the disc name preset mode is entered. The cursor blinks in the position where character input can be made. 3 Press either the 4 or ¢ button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. You can also move the cursor left or right by pressing the TRACK+ or TRACK� buttons, respectively, on the remote control. 4 Press the DISC+ or DISC� button to display the desired character.
NOTE

� The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. � Discs are identified by their total length and number of tracks. If you play another CD that happens to have exactly the same specifications as another CD whose name is stored, the wrong name will be displayed for it. � If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to enter the changes. � Pressing the reset button does not erase the disc names stored in a disc changer.

The operation and characters that can be entered may change as listed below, depending on the unit that is connected. Press the DISC+ or DISC� button to display the desired character. Besides the alphabet (capital letters only) and numerals, you can choose the following characters: /, +, �, *, =, <, >, [ and ] 5 Continue steps 3 and 4 until all the characters are chosen for the name.
NOTE

You can enter up to 8 characters for each name. 6 Press either the NAME.S button on the main unit or the OK button on the remote control.

� 20 �