Mask Key
If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft.
procedure in step 4.
5 Hold down the transmit button on the Mask key again until the
full transmit level indicator lights up in the display. "APPROVED" will appear in the display, with the Mask key function turning on. If you press the RESET button or remove the battery: The first time you turn the unit on again, �TRANSMIT 1� will appear in the display, indicating the setting mode has been entered. Repeat steps 4 and 5 above, and transmit the signal. You can start operating the unit again when "APPROVED" appears in the display.
When using the unit for the first time: In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask Key's signal. If this procedure is not carried out, the control panel of the unit will re-open in two seconds even with your vehicle's ignition turned off.
1 Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on. 2 Press the ¢ button repeatedly until the "Mask key" appears in the display. Press the 4 button to search in the other direction.
3 Hold down either the AM or FM button for two seconds or
more. "TRANSMIT 1" will appear in the display, indicating the setting mode has been entered. 4 Hold down the transmit button on the Mask key until the full transmit level indicator lights up in the display. "TRANSMIT 2" will be displayed.
Transmission part Transmit button
NOTE
� Keep the Mask Key close to the signal sensor when you transmit the Mask Key�s signal. � If the Mask Key�s signal does not be received correctly, the display will return to �TRANSMIT 1�. In this case, repeat the
