PIONEER KRP-500P/LFT
Instrukcja Obsługi

09

Useful adjustment settings

Note � Five minutes before the selected time elapses, the remaining time appears every minute. � To check the remaining time, perform steps 1 and 2. After checking the time, press HOME MENU to restore the previous display. � The SLEEP indicator on the front of the Media Receiver lights up in orange when the Sleep Timer is set.

4

Select �Change Password� (�/� then ENTER).

5 Enter a four-digit password to be newly set, using the buttons 0 to 9.
Change Password Please Input New Password.

Using a password
The flat screen TV provides a Channel Lock function for preventing children from watching inappropriate programs. You need to enter a password when watching programs with �Block� specified. Before the system is shipped, �1234� is preset as the factory-default password. You can however, change the password as you want. You will need to enter the password before using the �Auto Installation�, �Analog TV Setup�, or �Password� functions from the HOME MENU to prevent unauthorized changes to the settings.

Reconfirm New Password.

6

Enter the same password that you have entered in step 5. � If a different password is entered, the operation goes back to step 5 for reentry from the beginning. � You can try up to three times to reconfirm the new password before the Change Password screen is automatically exited.

Entering a password
In a case where you select a channel blocked with the Channel Lock function or if password entry is requested when attempting to open the menu, enter a password correctly. � Enter your four-digit password using buttons 0 to 9.

7

Press HOME MENU to exit the menu. Note � Take a note of the newly set password and keep it handy.

Resetting the password function
Please Input Your Password.

1 2

Press HOME MENU. Select �Setup� (�/� then ENTER).

Note � If you fail password entry three times, �Invalid password.� appears, and the menu is closed. In order to display the password entry screen again to unlock the password, select the blocked channel or open the menu again. � If the password entry screen disappears before entry, you may recall it by pressing ENTER.

3 Select �Password� (�/� then ENTER). The password entry screen appears. Enter your four-digit password using buttons 0 to 9. 4 5 6 Select �Reset� (�/� then ENTER). Select �Yes� (�/� then ENTER). Press HOME MENU to exit the menu. Note � The above procedure will reset the password to the factory default (1 2 3 4).

Changing the password
Use the following procedure to change the password. 1 2 Press HOME MENU. Select �Setup� (�/� then ENTER).

3 Select �Password� (�/� then ENTER). The password entry screen appears. Enter the current four-digit password using buttons 0 to 9.

We suggest you write down your password so you don�t forget it. If you forget the password

KRP-500A Your password No.:

When the message �Please Input Your Password� is displayed, press the ENTER button on the remote control unit and hold it down for three seconds or longer. The password reverts to �1234�.

44
En