Listening to the radio
You can use either automatic searching or manual searching to tune in to a particular station.
Searching for a station manually: Manual search
1
Select the band (FM1 � 3, AM).
Note: When a cassette is in the cassette compartment, you cannot select the tuner. Be sure to eject the cassette from the cassette compartment to listen to the radio.
Searching for a station automatically: Auto search
1
Select the band (FM1 � 3, AM).
Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2
Selected band appears.
Press and hold or until �M� (manual) starts flashing on the display.
Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
3
Tune in to a station you want while �M� (manual) is still flashing.
To tune in to stations of higher frequencies
2
Start searching for a station.
To search for stations of higher frequencies
To tune in to stations of lower frequencies � If you release your finger from the button, the manual mode will automatically turns off after 5 seconds. � If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM) until you release the button.
To search for stations of lower frequencies When a station is received, searching stops. To stop searching before a station is received, press the same button you have pressed for searching.
