Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually into the number buttons (1 � 6). � You can also preset an FM or AM station (such as your favorite station or traffic announcement station) into the EX (extra) button, and recall it by one-touch operation even if the unit is turned off. Ex.: Storing FM station of 88.3 MHz into the preset number 1 of the FM1 band.
4
Repeat the above procedure to store other stations.
Notes: � A previously preset station is erased when a new station is stored in the same preset number. � Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
1
Select the band (FM1 � 3, AM) you want to store stations into (in this example, FM1).
FM
Tuning in to a preset station
You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see �Storing stations in memory� on pages 7 and 8.
FM1 AM
FM2
FM3
AM
To tune in the stations stored in the number buttons
2
Tune in to a station (in this example, of 88.3 MHz).
To tune in to stations of higher frequencies To tune in to stations of lower frequencies
1
Select the band (FM1 � 3, AM).
FM
FM1 AM
FM2
FM3
AM
2
3
Press and hold the number button (in this example, 1) for more than 2 seconds.
Select the number (1 � 6) for the preset station you want.
�P1� flashes for a few seconds.
To tune in the favorite station stored in the EX button
The unit automatically turns on (if it has been off). Your favorite station is tuned in�except when the tape is playing. � If you press the button again, the last received station will be tuned in.
EX
You can also preset an FM or AM station into the EX button by pressing and holding the EX button in this step. � �P0� flashes on the display, showing that the station has been preset.
