Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
KS-F363R/KS-F360R
<Cassette mechanism assembly>
Prior to performing the following procedures, remove the head amplifier board, the relay board and the mechanism bracket.
C
FF / REW lever assembly Joint c
Removing the direction switch board (See Fig.1)
1. Unsolder the three wires a on the direction switch board. 2. Remove the one screw A switch board. attaching the direction
Joint e
Joint d
A B
Joint b
Removing the FF / REW lever assembly (See Fig.1)
1. Remove the screw B attaching the FF / REW lever assembly on the back of the cassette mechanism assembly. 2. Remove the screw C on the upper side of the FF / REW lever assembly. 3. Lift and pull forward the FF / REW lever assembly to disengage the joints b, c, d and e.
Soldering a Direction switch board
Fig.1
Reattaching the FF / REW lever assembly (See Fig.1)
1. Reattach the FF / REW lever assembly to the joint c on the back of the chassis. 2. Reattach the pinch-roller shaft e, the change lever d and the return link e to the chassis.
