Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
KS-F545
2.1.4 Removing the heat sink (See Fig.4) � Prior to performing the following procedure, remove the front panel assembly. (1) Remove the two screws B and two screws C attaching the heat sink on the left side of the main body, and remove the heat sink.
C
B
C
Heat sink
Fig.4
2.1.5 Removing the rear panel (See Fig.5) � Prior to performing the following procedure, remove the front panel assembly and bottom cover. (1) Remove the two screws D, two screws E and screw F attaching the rear panel on the back side of the main body.
F D
E
Rear panel
D
E
Fig.5
2.1.6 Removing the main board (See Fig.6) � Prior to performing the following procedures, remove the front panel assembly, bottom cover, front chassis, heat sink and rear panel. (1) Remove the two screws G attaching the main board on the top chassis. (2) Disconnect the connectors CP401 on the main board from the cassette mechanism assembly.
