Press and hold SEL for more than 2 seconds.
�CLOCK H�, �CLOCK M�, �SCM LINK�, �LEVEL�, �B.SKIP� or �EXT IN*� appears on the display.
SEL
1
Call up the sound mode you want to adjust.
� See page 15 for details.
SCM
* Displayed only when one of the following sources is selected�FM, AM and TAPE.
2
Select �BAS� (bass) or �TRE� (treble).
SEL
2
Select �SCM LINK� if not shown on the display.
3
Adjust the bass or treble level.
See page 14 for details.
3
Select the desired mode � �LINK ON� or �LINK OFF�.
4 5
Repeat steps 2 and 3 to adjust the other items. To turn ON/OFF the loudness function.
See page 14 for details.
LOUD
4
Finish the setting.
SEL
6
Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
Your adjustment made for the selected sound mode is stored in memory.
SCM
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustment in memory. � There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again.
7
Repeat the same procedure to store other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 15.
