WHIRLPOOL KUDI01DLBT0
Instrukcja Obsługi

s

Loading Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and utensils. Many items, up to 13 in. (33 cm) tall, fit in the bottom rack. (See recommended loading patterns shown.) NOTE: The features on your dishwasher rack may vary from the drawings shown.

Load cookie sheets, cake pans, and other large items at the sides and back. Loading such items in front can keep the water spray from reaching the detergent dispenser.

Mixed load
s s

Secure heavily soiled cookware face down in the rack. Make sure pot handles and other items do not stop rotation of the spray arm(s). The spray arm(s) must move freely. Do not load items between the bottom rack and the side of the dishwasher tub because they might block the water inlet opening.

10 place setting

s

FLEXI-FOLD DOWN� flexible tines (on some models)
You can fold down one or both rows of tines at the back of the bottom rack.

12 place setting
s

Do not load glasses, cups, or plastic items in the bottom rack. Load small items in the bottom rack only if they are secured in place. Load plates, soup bowls, etc., between tines. Overlap the edges of plates for large loads. Load soup, cereal, and serving bowls in the rack in a variety of ways depending upon their size and shape. Load bowls securely between the rows of tines. Do not nest bowls because the spray will not reach all surfaces.

s s s

1. Grasp the tip of the tine that is in the tine holder. 2. Gently pull the tine out of the tine holder. 3. Lay the row of tines down in the rack to make room for larger dishes, bowls, pots, pans or roasters.

Loading Silverware Basket
Load the silverware basket while it is in the bottom rack or take the basket out for loading on a counter or table. NOTE: Unload or remove the basket before unloading the racks to avoid spilling water droplets on the silverware.

Utensil load

8