SONY KV21FV1U
Instrukcja Serwisowa

Changing The Programme Order Of The TV Channels
The �Programme Sorting� option in the �TV Set Up� menu allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do that: by using the menu system and after selecting the option, press proceed in the same way as in the section �Switching On the Video TV and Automatically Tuning� (see step 5b) on page 6). and then
Programme Sorting Programme: Confirm: 01 -> 01

Selecting The Language Of The Menu Screens
The �Language� option in the �Set Up� menu allows you to select the language that the menus are displayed in. To do that: by using the menu system and after selecting the option, press and then proceed in the same way as in the section �Switching On the TV and Automatically Tuning� (see page 6, step 2).
OK

Set Up TV Set Up VCR Set Up Language Parental Lock: VHS: Picture Rotation:

Off Others 0
OK

Select channel: PROG + Select new position:

-

Locking The Video TV Manually Tuning The TV
The �Manual Programme Preset� option in the �TV Set Up� menu allows you to preset channels one by one to the programme order of your choice. To do that: 1 By using the menu system and after selecting the �Manual Programme Preset� option, press . Then with Programme option highlighted press . Press or to select on which programme number you want to preset the channel. Then press . 2 After selecting the Channel option, press . Then press or to select the channel tuning (�C� for terrestrial channels or �S� for cable channels). Next press . After that, press the number buttons to enter directly the channel number of the TV Broadcast. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store.
� Repeat all the above steps to tune and store more channels.

The �Parental Lock� option in the �Set Up� menu allows you to lock the buttons of the Video TV set. In this way, after this option is selected and the Video TV set is switched off, the buttons on the Video TV only works by using the remote control buttons. To do that: by using the menu system and after selecting the option, press . Then press
Manual Programme Preset Programme: System: Channel: AFT: Skip: Decoder: Confirm 01 I C 21 On No Off

or

to select On. Press OK to confirm and store and finally press

.

� To cancel this function afterwards, select �Off� instead of �On� in the step above. � If you have locked your Video TV and the remote commander is lost, press the button (during more than 5 seconds) on the set to operate it.

TV Set Up VCR Set Up Language Parental Lock: VHS: Picture Rotation:

Set Up

Off Others 0
OK

Adjusting The Picture Rotation
OK

(only for KV-21FV1U)
Because of the earth�s magnetism, the picture might be slant. In this case, you can correct the pictures slant by using the option �Picture Rotation� in the �Set Up� menu. To do that: by using the menu system and after selecting the option, press . Then press or to store. to correct any slant of the picture between -5 and +5 and finally press OK
Set Up TV Set Up VCR Set Up Language Parental Lock: VHS: Picture Rotation:

Fine Tuning Channels
Normally the Automatic Fine Tuning (AFT) is operating, however by using the �Manual Programme Preset� option in the �TV Set Up� menu you can manually fine tune the Video TV to obtain a better picture reception in the case that the picture is distorted. To do that: while watching the channel (TV Broadcast) you wish to fine tune, and by using the menu system select the �Manual Programme Preset� option. Press . With the AFT option highlighted, press . Next press or to adjust the fine tuning between -15 and +15. Finally press OK twice to store.

Off Others 0
OK

GB

Programme: System: Channel: AFT: Skip: Decoder: Confirm

Manual Programme Preset

01 I C

21 On No Off

Switching On The Video TV Automatically (On Timer)
OK

9 �
8

The �On Timer� option in the �Timer� menu allows you to preset your Video TV to automatically switch on at a desired time. You can select the TV programme or video playback to be switched automatically on from standby mode. To do that: by using the menu system and after selecting the option press ,
Time: Source: On Timer: On Timer 06: 00 TV PROG01 Off

Skipping Programme Positions
The �Manual Programme Preset� option in the �TV Set Up� menu allows you to skip any unwanted programme numbers when they are selected with the PROGR +/- buttons. To do that: by using the menu system and after selecting the �Manual Programme Preset� option, press . Then with the Programme option highlighted press . Next, press or to select the programme number you want to skip. Press . Then, select the Skip option and press . Next press or to select Yes. Finally press OK twice to confirm and store.
� To cancel this function afterwards, select �No� instead of �Yes� in the step above.
Manual Programme Preset Programme: System: Channel: AFT: Skip: Decoder: Confirm 01 I C 21 On No Off

1 With Time option highlighted, press . Press or to set the on-time hour then press . Proceed in the same way to set the minutes and press OK. 2 With Source option highlighted, press . Then press or to select the source to be switched on (�TV� or �VCR�). If you select �TV�, press and then press or to select the programme number you want the Video TV turns on. Press OK. 3 With On Timer option highlighted, press and then press or to select On. Press OK. 4 Finally press the standby button automatically.
OK

OK

. At the selected time, the Video TV switches on

� Any loss of power will cause these settings to be cleared. � By pressing the ON TIMER button on the remote control you can set on/off the On Timer, but it is not possible to change the time and programme settings.

Setting Pay-TV Channels
The �Manual Programme Preset� option in the �TV Set Up� menu allows you to watch Pay-TV channels by connecting a Pay-TV decoder to the Scart connector :1/ placed on the rear of the Video TV. To do that: by using the menu system and after selecting the �Manual Programme Preset� option, press . Then with the Programme option highlighted, press . Next press or to select the programme number with the scrambled channel and press . Select the Decoder option and press . Next press or to select On. Finally, press OK twice to confirm and store.
� While you are recording a programme which is being recorded through the Pay-TV decoder, you will not be able to view other programmes through the decoder.
Programme: System: Channel: AFT: Skip: Decoder: Confirm Manual Programme Preset 01 I C 21 On No Off
OK

Switching Off The Video TV Automatically (Sleep Timer)
You can automatically switch the video TV into standby mode after a selected time period. To do that: Press the SLEEP button on the remote control repeatedly to set the time period delay (OFF, 30, 60 or 90 minutes).
� While watching the TV, you can press the remaining. / button on the remote control to display the time

� One minute before the Video TV switches itself into standby mode, a good night message will be displayed on the screen. � To cancel this function afterwards, select �Off� in the step above.

TV Operation

TV Operation

9