SONY KV28FD1E
Instrukcja Serwisowa

2-9. PICTURE TUBE REMOVAL
3 DGC Holders

�

REMOVAL OF ANODE-CAP
carbon paint on the CRT, after removing the anode.

Note: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or

* REMOVING PROCEDURES.

Degaussing coil 4
a
b b

c

Anode button

1 Turn up one side of the rubber cap in the direction indicated by the arrow a

Spring Tension

5

2 Using a thumb pull up the rubber cap 3 When one side of the rubber cap is firmly in the direction indicated by the separated from the anode button, the arrow b anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c

2 Chassis assy
C Board

6

�

VM Board Neck Assy Deflection Yoke

7 8

HOW TO HANDLE AN ANODE-CAP Don't damage the surface of anode-cap with sharp shaped material ! Don't press the rubber hardly not to hurt inside of anode-caps ! A metal fitting called as shatter-hook terminal is built into the rubber. Don�t turn the foot of rubber over hardly ! The shatter-hook terminal will stick out or damage the rubber.

� 19 �
Anode cap

9

10
Four Tapping Screws

1

KV-28FD1/32FD1