SONY KV29FA210
Instrukcja Serwisowa

01US01COV-BR2.book Page 39 Wednesday, April 23, 2003 2:44 PM

Using the Menus

Using the Timer

Menu
Video Audio Channel Parent Timer Setup Basic

To access the Timer menu, use the following steps:

To Display

To Highlight

To Select

Timer 1 : Set Timer 2 : Set Current Time

Program

Program the time Move: Select:

: End:

AM

Current Time

Set your TV to the current day and time. Press to open the Current Time menu: 1 Use the F or f buttons to enter the correct day and time, then press .
2

Press

to exit the menu.

�

You must set the Current Time before you can use Timer 1 or Timer 2.

Timer 1 and Timer 2 Scheduled viewing

Use the timers to program your TV to turn on and off by day, time, duration, and channel. The timer duration is a maximum of six hours. When the channel is fixed, it is not necessary to set the channel. 1 Use the F or f buttons to highlight Timer 1 or Timer 2, then press .
2

3

Use the F or f buttons to enter the desired day, start time, duration, and channel, then press . The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be on. Press to exit the menu.

� �

Select Off to turn off the Timer. Your previous settings will be saved. When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.

39