Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 72 (kliknij aby zobaczyć)
Option
Description
z If 4:3 Default is set to
anything but Off, the Wide Mode setting changes only for the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off.
4:3 Default Wide Zoom Select the default Screen Mode to use for 4:3 sources Normal Full Zoom
Select to enlarge the 4:3 size picture, while the upper and lower parts of the picture are condensed to fit the wide screen. Select to return the 4:3 picture to normal mode. Select to enlarge the 4:3 picture horizontally only, to fill the wide screen. Select to enlarge the 4:3 picture horizontally and vertically to an equal aspect ratio that fills the wide screen. Select to continue using the current Wide Mode setting when the channel or input is changed.
SETUP SETUP SETUP SETUP Menus SETUP
Off
Vertical Center
Allows you to move the position of the picture up and down in the window. (Available only in Wide Zoom and Zoom modes.) Move the joystick V or v and press to choose a correction between +15 and -15 (Zoom mode), and +5 and -5 (Wide Zoom mode).
Vertical Size
Allows you to adjust the vertical size of the picture. (Available only in Wide Zoom and Zoom modes.) Move the joystick V or v and press correction between +7 and -7. to choose a
