...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
Installing the TV To set up your TV to use both a Cable Box and a direct-connect CATV cable:
1 Connect the Cable TV cable to the TV�s VHF/UHF jack. 2 Using a coaxial cable, connect the TV�s TO CONVERTER jack to
the cable box�s IN jack. The TV�s internal converter allows you to switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.
3 Using a coaxial cable, connect the cable box�s OUT jack to the
TV�s AUX jack.
Cable box IN OUT TO CONVERTER AUX Rear of TV
75-ohm coaxial cable (not supplied)
Signal VHF/UHF
CATV cable (unscrambled channels)
To switch between channels from Cable Box and channels coming directly into TV � Press the ANT button on the TV remote control. To use the TV remote control to switch channels on the cable box � Program the remote control as necessary. (See �Programming the
Remote Control� on page 50.)
To use the cable box � Have your TV tuner set to channel 3 or 4 (as appropriate) and
then use the Cable Box to change channels.
To prevent the accidental switching of TV channels � When using the VCR or Cable Box, you can use the Channel Fix
feature to lock in a channel. The Channel Fix feature is under the Channel menu. (See �Using the Channel Menu� on page 40.)
