Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
KV-DV7
Removing the fan assembly (See Fig.16 and 17)
Prior to performing the following procedure, remove the top cover, the front panel assembly and the DVD mechanism assembly. REFERENCE: It is not unnecessary to remove the main board and the rear panel. 1. Disconnect the wire from connector CN781 on the main board. 2. Remove the two screws K on the back of the body.
Fan assembly Rear panel CN781
Fig.16
K
Rear panel
Fan assembly
Fig.17
Removing the control switch board (See Fig.18)
Prior to performing the following procedure, remove the top cover and the front panel assembly. 1. Remove the three screws L attaching the control switch board on the back of the front panel assembly.
Joint d
Front panel assembly
Joint e
L
2. Disengage the three joints e of the front panel and the control switch board.
