Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 45 (kliknij aby zobaczyć)
Using the Yellow Labeled Buttons for PIP Operations
CH
or
0-9
or
JUMP
Press to select the TV channel on which the symbol �b� (or �B�) is displayed. (for details, see �Watching Conventional TV� on page 36)
REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART
and ENTER (white labeled button)
Notes:
TV ANT
Press to change between the VHF/UHF input and the AUX input for the picture on which the symbol �b� (or �B�) is displayed.
(white labeled button)
AUDIO
Press to alternate sound between the main picture and the window picture. The symbol " " will appear for a few seconds to indicate which picture�s sound is being received.
FREEZE
� If one of the pictures received through PIP is snowy, the entire screen may become unstable. In this case, erase the snowy channel. (see �CHANNEL SKIP� on page 54) � You can change the wide screen mode of the main picture only. The mode is not available for the window picture. � The 16:9 aspect ratio picture with ID-1 or S1 is always displayed in FULL mode, even when it is shown as the window picture.
This is useful when you need to copy down information that appears on the TV�s screen. Press to freeze the main and window pictures. Press again to resume PIP viewing. Press (OFF) to cancel and resume normal TV viewing.
SWAP
Press to switch the audio and video of the main picture and the window picture. Each time you press SWAP, the picture and sound of the two will be exchanged. Press to access CHANNEL INDEX for direct channel selection. (see �Using CHANNEL INDEX� on page 44)
OFF
Press to cancel the PIP function and return to normal viewing.
