Changing general settings (PSM)
You can change the settings for this unit by using the PSM (Preferred Setting Mode) control.
6
Finish the setting.
Basic Procedure
� There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1
To check the current clock time while the unit is turned off, press DISP (display). The power turns on, the clock time is shown for 5 seconds, then the power turns off.
Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 31.)
2
Select a PSM item you want to adjust. (See page 31.)
3
Adjust the PSM item selected.
4 5
Repeat steps 2 and 3 to adjust the other PSM items if necessary. Finish the setting.
