|
Dla tego produktu nie napisano jeszcze recenzji!
8. Help
4. Push back the levers (1) to the original position. L Before re-inserting, make sure to fan and straighten the recording paper.
2 1
1
3
Close the front cover (1) by pushing down on both sides, until locked. Pull the tension plate forward (2) and re-insert the recording paper (3), then push back the tension plate. L Before re-inserting, make sure to fan and straighten the recording paper.
8.6 Document jams sending
1
Lift open the front cover (1), holding OPEN (2).
1
3 1 2
2 3
8.5.2 When the recording paper is not fed into the unit properly
The display will show the following. FAILED PICK UP Remove the recording paper. Pull the tension plate forward (1) and re-insert the recording paper (2), then push back the tension plate.
Caution: The fuser unit (3) gets hot. Do not touch it.
51
|
