Answering system
Important: L Only 1 person can access the answering system at a time. L When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been set (page 17). L The unit�s answering system will not answer incoming calls on your FaxAbility number. Memory capacity The total recording capacity (including your greeting message and caller messages) is about 15 minutes. A maximum of 64 messages (including a greeting message) can be recorded. L If the message memory becomes full, the ANSWER ON indicator flashes rapidly (if the answering system is turned on). Erase unnecessary messages (page 33). L If less than 3 minutes of recording time are available, the unit announces the remaining recording time when operating the answering system. Erase unnecessary messages (page 33).
Screening calls While a caller is leaving a message, you can listen to the call through the base unit�s speaker. To adjust the speaker volume, press {>} or {<} repeatedly. You can answer the call by pressing {C} on the handset. Turning off the call screening feature When the base unit is not in use, press {GREETING CHECK}, then press {<} repeatedly until �0� is displayed. OR While screening, press {<} repeatedly until �0� is displayed. Note: L If you adjust the speaker volume while listening to messages or talking on the intercom, the speaker volume for call screening is turned on again.
Recording your greeting message
You can record your own greeting message (max. 2 minutes) that is played when the answering system answers a call. If you do not record a greeting message, a prerecorded greeting message is used.
Turning the answering system on/off
Press {ANSWER ON} to turn on/off the answering system. L When the answering system is turned on, the ANSWER ON indicator lights. L When the answering system is turned off, the ANSWER ON indicator turns off.
1 2 3 4
{GREETING REC} Within 10 seconds, press {GREETING REC} again. After the base unit beeps, speak clearly about 20 cm away from the MIC. To stop recording, press {STOP}.
