|
|
|
Kto jest w sklepie?
Sklep przegląda 6043 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
11.4. Signal Flowchart in the Whole System
Reception CN101 of the base unit is connected to the TEL line, and the signal is input through the bridge diode D101. While talking the relay (Q121) is turned ON and amplified at the amplifiers Q461, then led to DSP (IC501). DSP generates ADPCM signal. The ADPCM signal is input to RFIC (IC101) of RF UNIT, and is mixed with pseudo random noise code (PN code) to spread the spectrum. RFIC outputs FSK modulated RF signal. The RF signal is passed through the balun (T101) and filter (L107) to the T/R switch (IC109). And the RF signal amplifies by the power amplifier (IC105) and fed into T/R switch (IC110) and passes through filter (L106) to Diversity ANTENNA. As for the handset, RF signal from the antenna passes through filter (L106) and switch by T/R switch (IC110) to LNA (IC106). The RF signal is amplified by LNA (IC106) and switched by T/R switch (IC109) and input to RFIC passing through filter (L107) and the balun (T101) to perform the despread, then input to DSP (IC201). DSP performs ADPCM decoding to convert the signal into the voice signal, then it is output to the speaker.
Transmission The voice signal input from the microphone is led to DSP (IC201). The DSP generates ADPCM signal. As well as the reception, it is converted into the RF signal by RFIC (IC101). Passing through the balun (T101) and filter (L107), to the T/R switch (IC109). And the RF signal amplifies by the power amprifier (IC105) and fed into T/R switch (IC110) and passes through filter (L106) to ANTENNA. As for the base unit, RF signal from the Diversity antenna passes through filter (L106) and switch by T/R switch (IC110) to LNA (IC106). The RF signal is amplified by LNA (IC106) and switched by T/R switch (IC109) and is input to RFIC (IC101) passing through filter (L107) and the balum (T101) to perform the de-spread, then input to DSP (IC201). DSP performs ADPCM decoding to convert the signal into the voice signal. The voice signal is amplified at the TX amplifier (Q131), then output to the TEL line (CN101) through the relay (Q121) and bridge (D101).
68
|
|
|
> |
|
