HOT WATER can be selected by turning the Control Knob to 12 or 14 minutes in the REGULAR HEAVY Cycle. All rinses use cold water. This saves energy and helps prevent wrinkles from setting into fabrics.
WARM WATER can be selected by turning the Control Knob to 8 or 10 minutes in the REGULAR HEAVY Cycle.
l
A warm wash is preset in the SHORT Cycle. Just turn the Control Knob to the 4 or 6 minutes setting in that cycle.
3 . To Select
a WATER LEVEL
HIGH WATER LEVEL. The washer will automatically fill to its highest level, (about 17.2 galsI65.1 L), when the Control Knob points to a FILL area. NOTE: The washer will fill only when the knob points to a FILL area.
LOWER WATER LEVELS. Setting the washer to fill with less water also sets it for a shorter wash time. 1. Push the Control Knob in and turn it clockwise to FIN area in the cycle you want. 2. Pull the Control Knob out; the washel will start to fill. 3. When the washer reaches the desired water level, push in the Control Knob and slowly turn it past the FILL area. Pull out the Control Knob to start the washer. For all rinses, the washer fills to its highest level with cold water. 5
