For a Pre Wash
Use this setting TV� a shiorter SOAK CYCLE (no rinse� Jse enough detergent for a sIngIt; .LJS~ 4dd the ioad l Set the LOAD SIZE SELECTOR. l Push the Cycle Con*rcl Knob In and turn it to the 12-mrnufe mark In the SOAK CYCLE
Cycle Control Knob, turn the pointer one of those asterisks and pull the Control agrtate, Knob out, the washer drain and spin
WIII fill,
to
The washer Water level be adjusted
fills with cold water and temperature can�t in this setting
For Spinning
�?. . . .j�L�
SOAh
Only
.
l Pull the Control Knob out to start the washer l The washer will fill, agitate for two mrnutes, soak for eight mrnutes, agitate for two more, and �hen drain and spin (See SOAK CYCLE description on pagea ) l
There may be times when you wart to drain out all the wash water and start over. To stop the wasner at any time, just push in on the Cycle Cortrol Knob
After filling, pause before
the washer may starting to agitate.
To set the washer so it drains and spins water out of the load, push In on the Control Knob, turn to the right (clockwise) so the pointer IS touching the bar just before OFF in any cycle The washer WIII drain, spin out water and stop.
For Rinsing Only
Loads with towels, diapers, jeans or heavrly soiled items often need extra detergent Extra detergent can require an extra rinse Your washer can be set to rinse only Use the settiny for an extra rrnse, or for laundry that orI\/ needs a rinse and spin
There IS an �asterlsk( ) just after the numbers in REGULAR HEAVY and SHORT cycles If vou push In on the
