your washer
1. Measure and add detergent. 2. Place sorted load in washer. 3. Start washer.
1.
Select CYCLE and WASH TIME; Start the washer
A.
Push in the Control Knob and turn it to the right. It must be pushed in and turned only clockwise.
Stop on a number in the cycle you want. The numbers are minutes of wash time. The drawing shows 8 minutes of agitation in the REGULAR HEAVY Cycle. NOTE: In the REGULAR HEAVY and SHORT Cycles, the washer will fill only when the knob points to a �fill� area.
B.
C.
Start the washer by pulling out the Control Knob.After filling,the washer will agitate for the selected number of minutes. 4
To stop the washer at any time, push in the Control Knob. To restart the washer, pull out the Control Knob. rinse), a drain and
D.
To set the controls for a rinse and spin (second spin, or a soak or pre-wash, see page 8.
