Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
Starting
Beforestarting yourwasher:
your washer
1 Measure and add detergent 2 Place sorted load in washer. 3 Start washer
Select 1. LOAD
a SIZE
2.
Select WATER TEMPERATURES
l
l
To change the setting on the LOAD SIZE SELECTOR, turn the knob to RESET Then turn the knob to point at a setting that describes the size of the load you want to wash. Set the knob anywhere on or between HAND WASHABLE (a few small items] and EX LARGE (a full load) See your �Laundry Guide� for details on load sizes.
. Select wash and rinse water temperatures by pushing a button. This drawing shows a warm wash [top temperature) and cold rinse (bottom temperature) selection. Recommended wash temperatures can be found in your �Laundry Guide�
LOAD
SIZES
AND
WATER
the freely or too or
LE\ELS
DO NOT OVERLOAD WASHER. 0 EX-LARGE (20 5 gals 77 6 L)� MEDIUM (13.9 gals.,52.6 L)� HAND WASHABLE (7.8 gals 129.5 L]�
For best cleaning results, load must be able to move In the water. Too big a load little water can cause wear tearing of load items.
