Setting the delay timer
The T (DELAY TIMER) button allows you to delay the start of a programme. 1. Select a programme. 2. Press the T (DELAY TIMER) button once if you would like the wash programme to begin in 6 hours. The 6h indicator will illuminate. Press the T (DELAY TIMER) button twice if you would like the wash programme to begin in 3 hours. The 3h indicator will illuminate.
3
If you press the T (DELAY TIMER) button once again the delay timer setting is cancelled. The indicator goes out. 3. To activate the delay timer, press the S/P (START/PAUSE) button. Note: If a start delay of 6 hours is selected, the 6h indicator will illuminate. After 3 hours the indicator will change and 3h will illuminate. After a total of 6 hours the wash programme will begin.
Starting a programme
1. Check that the tap is turned on. 2. Press the S/P (START/PAUSE) button. The programme starts or will start after the delay timer has elapsed as set. During the wash programme the current stage of the programme is shown in the programme progress display.
3
If after pressing the S/P (START/PAUSE) button the E (END) display flashes 4x, the door has not been closed properly. Push the door firmly closed and press the S/P (START/PAUSE) button again.
