Water cooling or an additional rinse is necessary
The washing machine is set up for extremely low water consumption. It can, however, be necessary to cool down the water prior to pumping out in order to avoid damage to plastic waste pipes (water cooling). For people who suffer from an allergy to detergents, it can be useful to rinse with more water (additional rinse). This can be adjusted using the More Water Switch: Position 1: Water Cooling The water is cooled prior to pumping out at the end of the main washing cycle (by adding cold water). This setting is only effective for t (Cotton/Linen) with a temperature of over 40 °C.) Position 2: Water Cooling with Additional Rinse The water is cooled as for position 1, in addition (except for s/Wool) an additional rinse is performed. As supplied the More Water Switch is set to position 0.
3
The duration of the program and water consumption are increased by water cooling and the additional rinse.
Make the adjustment: 0 Pull out the detergent drawer until the More Water Switch is accessible in the frame on the left. 0 Set the More Water Switch to 1 (water cooling) or 2 (water cooling and additional rinse).
