Starting the washing program
0 1. Check that the water tap is open.
2. Start the washing program: Press the START/PAUSE button The washing program is started or starts at the end of the time delay set.
3
The door is not correctly closed if, when the button START/PAUSE is pressed, � the error code Cd is shown in the multi-display and � the indicators PRE WASH, RINSE and RINSE+ flash In this case, press the door firmly closed and again press the START/PAUSE button. If the delay timer has been set: The start time delay set on the time delay counts down; the time remaining until the program starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer. � Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again. � Changing or stopping delay timer: Press the DELAY TIMER button repeatedly until the desired time is displayed. When the program duration is displayed (display in minutes e. g.120) the washing program starts without delay.
